Environmental Protection Equipment Customize Hot Cleaning Oven for Manufacturing Industry

• After-sales Service: Available
• Warranty: 1 Year
• Type: Powder Coating or Painting Remove
• Coating: Powder Coating / Painting
• Substrate: Steel
• Certification: CE, ISO
• Model NO.: ZY-10
• Condition: New
• Control Methord: Full Automatic PLC
• Working Temperature: 250ºC-480ºC
• Imput Voltage: 220-380V
• Power Supply: Electric/LNG/ LPG
• Warm Board Thickness: 150mm After Forming
• Alarm Mode: Sound and Light Alarm
• The Material of Inner Wall: Stainless Steel
• Thermal Insulation Material: High Temperature Resistant Ceramic Cotton
• Transport Package: Wooden Case
• Specification: Regular and Customization
• Trademark: ZhiYing or customize
• Origin: China
• HS Code: 851419
• Production Capacity: 1000PCS/Year

Product Description

 

Burn-off Oven For Removing Paint & Powder Coating
 

If you have specific parameters and requirements for your own burn-off oven, customization is quite available.
 

Introduction: The hot cleaning furnace can efficiently and safely wash the chemicals attached to metal parts .Use of polymer is higher than 300 degrees was isolated from the air can be cracking, above 400 degrees in a small amount of air can completely oxidation characteristics, The organic matter on the surface of the hanging device or workpiece to be treated is heated to the decomposition temperature in the first combustion chamber and automatically controlled at this temperature Interval, so that the workpiece surface coating (paint, oil, epoxy polyester, etc.) cracking into organic gas. Organic gas into
The second combustion chamber ,it is fully burned in the high temperature environment of the second combustion chamber, and finally produces colorless, non-toxic, odorless gas and exhaust through the chimney. The exhaust gas is strictly tested and certified by authoritative environmental protection testing institutions, and the indicators are up to date National environmental protection emission standards. After the treatment of the hanger or workpiece, as long as gently beat or wash off the surface of the inorganic substance .The machine can be used again.

By thermal cleaning to remove surface coating and paint of the hanging work pieces,they are placed in the main decomposition chamber at ambient workpieces temperature from 250 ~ 480 ºC to removal of organic matter on the workpiece. After the process, the surface of work piece is without any organic coating layer residual..

 Size:

Model	Outer Size     (LXDXH cm)	Working Size   (LXDXH cm)	Max.Workpiece Size (LXDXH cm)	Capacity (m3)
ZY-02	171x170x181	145x145x145	130x120x120	2
ZY-04	200x199x210	174x174x174	160x150x150	4
ZY-06	229x199x239	203x174x203	190x150x150	6
ZY-08	258x199x239	232x174x203	210x150x150	8
ZY-10	287x228x239	261x203x203	240x180x150	10
ZY-12	287x228x268	257x198x230	240x180x180	12
ZY-16	374x228x268	348x203x232	330x180x180	16
Any size can be customized.

Photos for reference:





Application:

1. Remove the thickening coating on the spray hanger and fixture without changing the mechanical properties of the hanger.

2. Completely and completely peel off the unqualified paint or powder coating on the surface of steel parts and aluminum parts without damage to the workpiece.

3. Clear water curtain spray cabinet filter, fan impeller adhesion paint layer.

4. Clean and remove the winding and adhesion of wires, cables, transformers, motors and printing rollers.

5. Clean and remove grease, oil and other organic matter on engine, crankshaft, box body, piston ring and other parts.

 

Technical parameter:
 

Application:	Remove organic matter not limited to epoxy, polyester, mixed powder coatings and paints on workpiece surface
Fuel requirements:	Light diesel/natural gas/liquefied petroleum gas
Control mode:	industrial PLC automatic control
Operating temperature:	250° C ~480 ° C adjustable (secondary combustion chamber temperature 500 ° C ~1200 ° C)
Furnace wall temperature:	≤60ºC
Chimney wall temperature:	<150ºC
Alarm mode:	sound and light alarm

Product characteristics:

1. Industrial microcomputer system, no manual setting time and temperature, control system automatically control shutdown time

2. Stainless steel liner, prolong the life of furnace body by 2 times

3. The main parts are imported with high reliability

4. The combustion chamber is made of rare earth foam with special mold, which is produced by professional factory. It has longer life, good heat insulation effect and 30% energy saving

5. Cooperate with automatic water control system to ensure that the furnace can still operate safely when the short time water supply is interrupted
Multi-level safety protection, water spray + temperature limit protection + explosion-proof door + automatic alarm

6. Low operating cost, only 1/8 of the cost of chemical treatment

7. Controllable working temperature, effectively reduce the rigidity and strength loss of the workpiece

8. Exhaust gas is mainly harmless substances such as CO2 and water, among which the emission of SO2 and NOX is far lower than that detected by environmental protection departments 




Temperature control system And safety assurance:

1. Realize fine control of temperature slope according to temperature variation;

2. Automatic run time control;

3. Adopt proportional adjustment combustion mode to make the temperature rise smoother and the equipment run more stable;

4. The machine automatically detects the water pressure when it is started. If there is no water pressure, the device cannot be started.

5. Automatically detect the nozzle after startup to eliminate the blockage of the nozzle;

6. Detect the water spraying condition, close to the limit when the nozzle is in the normal spraying state;

7. Water spraying is divided into emergency water spraying and working water spraying. Emergency water spraying adopts never blocking nozzle to ensure the safety of equipment.

8. The equipment is equipped with an emergency stop switch to forcibly stop all operations and energy of the equipment;



 

 

FAQ

Is it safe to order from Shaoxing Synergy?

Yes,100% sure you are safe to order from us. We exported to many countries and the factory produce powder coating equipment more than 10 years in China.

 

How to delivery?

As the big equipment , so we suggest send by sea . 

 

Payment terms?

In genara, it's 30% TT in advance as deposit  , the balance by TT before shipment .
 

 

Which model should I choose?
It'e depends on your specific situation , such as the size of the faciity , the kind or the qty of workpieces . 
The more details you provided  , the more professional proposal we can suggest . 

 

Can I customized the machines?
Yes, we are a professional team for powder coating equipments, Our technician will design for you specially according to your needs and your factory, workpiece etc information.

What should I offer if I want to customized the machine?
a. Your factory available for the equipment dimension by L x W x H
b. Your max workpiece or product weight and size by L x W x H
c. Your product surface condiation(with oil or dust?) and some pictures if possible
d. Your output capacity(for machine line)
e. Your industrial electric power in V-Phase-Hz.

Can you install for us?
Yes, we can install overseas for you. But the engineers overseas installation cost, round trip air tickets, accommodation, meals and transport charges are on the buyers.